Dickerson 8013

8ft #5wt. 2 piece

The following taper was taken from a varnished 8013. I deducted .005 for the varnish. It looked fairly thin. If you know something different about Dickerson's typical varnsh coat, make the appropriate adjustment. Measurements under the handle are obviously estimates.
My notes show actual readings to the 85" mark. The .375 estimates come from my understanding that Dickerson used this as a standard butt measurement.

Thanks to Tom Smithwick for providing this taper

Points

Dimensions

Point 0 .07400
Point 5 .08200
Point 10 .09500
Point 15 .11500
Point 20 .12900
Point 25 .14500
Point 30 .16000
Point 35 .17000
Point 40 .18000
Point 45 .18900
Point 50 .21500
Point 55 .23200
Point 60 .25100
Point 65 .27200
Point 70 .29300
Point 75 .30440
Point 80 .31800
Point 85 .34400
Point 90 .37500